Cisco Catalyst 6509 데이터시트 - 페이지 18

{카테고리_이름} Cisco Catalyst 6509에 대한 데이터시트을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco Catalyst 6509 30 페이지. Catalyst 6500 series chassis and module power and heat values
Cisco Catalyst 6509에 대해서도 마찬가지입니다: 보충 설명서 (3 페이지), 사용자 설명서 (28 페이지), 전원 설명서 (4 페이지), 기술 정보 (16 페이지)

페이지 인쇄

CISCO CATALYST 6500 SERIES CHASSIS

Cisco Catalyst 6500 Series chassis can be deployed in the wiring closet, the distribution and core layers, the data

center, and the WAN edge, providing the power and features required for end-to-end deployment for the enterprise

campus, the ISP network, metro, and research computing networks.

Chassis Applications

The Cisco Catalyst 6500 Series provides a selection of chassis, including 3-, 6-, 9-, and 13-slot models with slots

arranged horizontally and a 9-slot model with slots arranged vertically, with front-to-back airﬂow. Typical

applications for Cisco Catalyst 6500 Series chassis include:

• 3-slot chassis—Low-density, wiring-closet chassis sharing interface modules and supervisor engines with larger

chassis for common sparing; low-density, high-performance specialized services modules chassis for network

security and management; low-density, high-end chassis providing connectivity to the WAN edge

• 6- and 9-slot chassis—Traditional chassis for the wiring closet, distribution and core, data center, and WAN edge

• 13-slot chassis—Highest-capacity chassis for Ethernet connectivity, with slots to spare for services modules

providing network security and management

Chassis Conﬁguration

All Cisco Catalyst 6500 Series chassis are NEBS Level-3 compliant and use common power supplies. The 6- and 9-

slot chassis require a 1000W or 1300W power supply and the 13-slot chassis requires a 2500W or 4000W power

supply. The 3-slot chassis requires a 950W power supply. When ordering a Cisco Catalyst 6500 Series switch,

use the online Cisco Dynamic Conﬁguration Tool to assist you in selecting the chassis, power supplies, power cables,

and fan trays that will meet your requirements. The tool is available at:

conﬁgureHomeGuest.html

Power

All Cisco Catalyst 6500 chassis hold up to two load-sharing, fault-tolerant, hot-swappable AC or DC power supplies.

Only one supply is required to operate a fully loaded chassis. If a second supply is installed, it operates in a load-

sharing capacity. The power supplies are hot-swappable—a failed power supply can be removed without powering

off the system.

Cisco Catalyst 6500 Series switch power supplies are available in the following power ratings:

• 950W AC input (Cisco Catalyst 6503 chassis)

• 1400W AC input (Cisco Catalyst 6503 chassis)

• 1000W AC input

• 1300W AC and DC input

• 2500W AC and DC input

• 3000W AC input

• 4000W AC input

Table 4 outlines the power requirements and heat dissipation for the different models of power supplies available

for the Cisco Catalyst 6500 Series switch.

Cisco Systems, Inc.

Page 18 of 29

http://www.cisco.com/appcontent/apollo/