Cisco Cisco mds 9216 - fabric switch 하드웨어 설치 매뉴얼 - 페이지 9

{카테고리_이름} Cisco Cisco mds 9216 - fabric switch에 대한 하드웨어 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco Cisco mds 9216 - fabric switch 36 페이지. Multilayer fabric switch
Cisco Cisco mds 9216 - fabric switch에 대해서도 마찬가지입니다: 연결 매뉴얼 (13 페이지), 구성 매뉴얼 (49 페이지), 릴리스 노트 (48 페이지), 릴리스 노트 (44 페이지), 릴리스 노트 (44 페이지), 릴리스 노트 (36 페이지), 릴리스 노트 (26 페이지), 릴리스 노트 (22 페이지), 빠른 참조 매뉴얼 (14 페이지), 릴리스 노트 (3 페이지), 사양 (11 페이지)

Chapter 2

Installing the Cisco MDS 9216 Switch

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m .

Position the chassis in the rack, inserting the rear of the chassis between the front mounting rails (see

Step 3

Figure

the front rack-mount brackets to the mounting rails (three per side).

If you are installing the optional cable guides, place the cable guides in front of the front rack-mount

brackets, and then pass the screws through the cable guides, front rack-mount brackets, and mounting

rail. You can install one or both cable guides; if installing a single cable guide, it can be installed on

either side.

Figure 2-4

1 Mounting rail

2 Front rack-mount

bracket

From the back of the rack, position the longer slider rails with the ears away from the chassis and slide

Step 4

them into the C brackets previously installed on the sides of the chassis (see

Level the chassis (it may sag slightly towards the back) and attach the slider rails to the mounting rails

Step 5

with the 12-24 x 3/4-in. or 10-32 x 3/4-in. screws, three per side.

OL-6985-01

2-4). Use the 12-24 x 3/4-in. or 10-32 x 3/4-in. screws (depending on the type of rack) to attach

Installing the Cisco MDS 9216 Switch in the Rack

M D

9 2

1 6

3 Screws, 12-24 or 10-32

Installing the Chassis in a Cabinet or Rack

Cisco MDS 9216 Switch Hardware Installation Guide

Figure

2-5).

2-9