Cisco CWDM-OADM 1-1550 설치 참고 사항 - 페이지 16

{카테고리_이름} Cisco CWDM-OADM 1-1550에 대한 설치 참고 사항을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco CWDM-OADM 1-1550 36 페이지. Passive optical system

Installing the CWDM Passive Optical System

Secure the 2-slot chassis using four (two per side) 12-24 x 3/4-inch screws or four 10-32 x 3/4-inch

Step 3

screws. Thread the screws through the elongated holes in the L bracket and into the threaded holes in the

mounting post. (See

Figure 15

Installing the CWDM OADM Modules

Caution

When performing the following procedures, wear a grounding strap to avoid ESD damage to the OADM

module. Make sure the other end of the ground strap is securely attached to a grounded point.

To install the CWDM OADM modules, follow these steps:

Align the CWDM OADM module with the slot on the 2-slot chassis. (See

Step 1

Figure 16

CWDM-

OADM4-1

Cisco CWDM Passive Optical System Installation Note

Figure

15.)

Mounting the 2-Slot Chassis in the Rack

Installing a CWDM OADM Module

NETWORK

PASS

1470

1510

MONITOR

1490

1530

NETWORK

PASS

1550

1590

CWDM-

OADM4-2

MONITOR

1570

1610

Figure

16.)

78-16565-02