3Com AirProtect Sentry 5850 빠른 시작 매뉴얼 - 페이지 2
{카테고리_이름} 3Com AirProtect Sentry 5850에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. 3Com AirProtect Sentry 5850 15 페이지. Secure converged networks enterprise edition
3Com AirProtect Sentry 5850에 대해서도 마찬가지입니다: 데이터시트 (4 페이지), 제품 설명서 (15 페이지)
페이지 인쇄
3Com AirProtect Sentry 5850 Features
1
6
7
Feature
1
Antenna
Connectors
2
LEDs
3
Ethernet Port
4
Serial Port
5
Reset Button
6
Kensington lock connector
7
Detachable rear-panel cover
8
Mounting Bracket
2
Description
Two RSMA type antenna connectors allow you to connect antennas
that operate in 2.4 GHz and 5.0 GHz bands.
The LEDs indicate power and activity. See "Checking the LED
Indicators" on page 7 for details.
The Ethernet port provides a 10/100BASE-TX Ethernet connection to a
3Com switch. Use a suitable Category 5 cable with straight-through
signaling and standard RJ-45 connectors to connect your Sentry to the
switch on the network.
Provides a serial interface to the Sentry for diagnostic use.
To restore factory settings, press the reset button during power-up by
inserting a pointed object into the reset hole on the back of the Sentry
and holding for five seconds.
The mounting bracket comes attached to the Sentry and allows the
unit to be mounted on a wall or ceiling.
3
4
2
1
5
8