Cisco Firepower 4110 매뉴얼 - 페이지 4

{카테고리_이름} Cisco Firepower 4110에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco Firepower 4110 8 페이지. Rack-mount and ground the chassis
Cisco Firepower 4110에 대해서도 마찬가지입니다: 유지 관리 및 업그레이드 매뉴얼 (20 페이지), 매뉴얼 (36 페이지), 매뉴얼 (26 페이지), 매뉴얼 (42 페이지), 시작하기 (42 페이지)

페이지 인쇄

Rack-Mount the Chassis

c) Set the keyed slots over the pegs, and then slide the rail toward the front to lock it in place on the pegs. The rear key

slot has a metal clip that locks over the peg.

d) Secure the inner rail to the side of the chassis using one M3 x 6 mm screw.

e) Install the second inner rail to the opposite side of the chassis and secure with the other M3 x 6 mm screw.

Figure 2: Attach the Inner Rail to the Side of the Chassis

Chassis side by front panel

M3 x 6-mm screw (one per side)

Step 3

Open the front securing plate on both slide-rail assemblies. The front end of the slide-rail assembly has a spring-loaded

securing plate that must be open before you can insert the mounting pegs into the rack-post holes.

On the outside of the assembly, push the green arrow button toward the rear to open the securing plate.

Rack-Mount and Ground the Chassis

Inner rail