Argon 18 E-80 조립 설명서 - 페이지 12

{카테고리_이름} Argon 18 E-80에 대한 조립 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Argon 18 E-80 16 페이지.

E-80 : 5. Saddle adjustment

1. Install the saddle on the rocker (5f)

and slightly tighten the rail clamp (5e)

using a ball end hex key.

8Nm

2. Tighten the upper screw of the rocker

clamp (5a) by keeping a space of 2

to 3mm between the aluminum and

carbon parts.

3. Adjust the angle of the saddle and

GREASE

tighten the lower bolt of the rocker

8Nm

clamp (5b).

4. Adjust the saddle offset and finalize

the tightening of the rail clamp (5c).

GREASE

2-3mm