Cisco FPR1150-ASA-K9 하드웨어 설치 매뉴얼 - 페이지 34

{카테고리_이름} Cisco FPR1150-ASA-K9에 대한 하드웨어 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco FPR1150-ASA-K9 42 페이지.

Connect to the Console Port with Microsoft Windows

Figure 25: Console Port Connection

USB Mini B console port

USB Type A

Step 4

Connect the end of the cable with the DB-9 connector (or USB Type A) to the terminal or PC. If your terminal or PC has

a console port that does not accommodate a DB-9 connector, you must provide an appropriate adapter for that port.

The LED for the console port turns green and within a few moments the Found New Hardware Wizard appears.

Step 5

Follow the instructions to complete the driver installation.

Step 6

To communicate with the chassis, start a terminal emulator application. This software should be configured with the

following parameters:

• 9600 baud

• 8 data bits

• no parity

• 1 stop bit

• no flow control

Cisco Firepower 1100 Series Hardware Installation Guide

USB Mini B to USB Type A console cable

—

Connect to the Console Port