Cisco IAD2430 Series 빠른 시작 매뉴얼 - 페이지 7

{카테고리_이름} Cisco IAD2430 Series에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco IAD2430 Series 34 페이지. Integrated access device
Cisco IAD2430 Series에 대해서도 마찬가지입니다: 개요 매뉴얼 (13 페이지), 개요 (16 페이지)

페이지 인쇄

Accessibility

This product family uses a command-line interface (CLI). Because it is text based and relies on a keyboard for navigation, the

CLI is 508 conformant. All functions of the router can be configured and monitored through the CLI.

To view Cisco accessibility guidelines and product adherence, see Cisco Accessibility Products at the following URL:

http://www.cisco.com/web/about/responsibility/accessibility/products

Safety Information

The following warnings apply to the Cisco IAD2430 series IADs and should be read before installing this product.

For safety information that you need to know before working on your Cisco IAD2430 series IAD and for full translations of

the warnings in this document, see the Cisco IAD2400 Series Regulatory Compliance and Safety Information document at the

following URL:

http://www.cisco.com/en/US/docs/routers/access/iad2400/hardware/rcsi/2400rcsi.html

Warning

IMPORTANT SAFETY INSTRUCTIONS

This warning symbol means danger. You are in a situation that could cause bodily injury. Before you work on any

equipment, be aware of the hazards involved with electrical circuitry and be familiar with standard practices for

preventing accidents. Use the statement number provided at the end of each warning to locate its translation in

the translated safety warnings that accompanied this device. Statement 1071

SAVE THESE INSTRUCTIONS

Warning

Only trained and qualified personnel should be allowed to install or replace this equipment. Statement 1030

Warning

Do not work on the system, or connect or disconnect cables during periods of lightning activity. Statement 1001

Warning

Read the installation instructions before connecting the system to the power source. Statement 1004

Warning

This product relies on the building's installation for short-circuit (overcurrent) protection. Ensure that the

protective device is rated not greater than:

120 VAC, 15A (240 VAC, 10A international) Statement 1005

Warning

To avoid electric shock, do not connect safety extra-low voltage (SELV) circuits to telephone-network voltage

(TNV) circuits. LAN ports contain SELV circuits, and WAN ports contain TNV circuits. Some LAN and WAN ports

both use RJ-45 connectors. Use caution when connecting cables. Statement 1021

Warning

Hazardous network voltages are present in WAN ports regardless of whether power to the unit is OFF or ON. To

avoid electric shock, use caution when working near WAN ports. When detaching cables, detach the end away

from the unit first. Statement 1026

Warning

This equipment has been designed for connection to TN and IT power systems. Statement 1007