Digitrax SoundFX SDXN146K2 매뉴얼 - 페이지 2
{카테고리_이름} Digitrax SoundFX SDXN146K2에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Digitrax SoundFX SDXN146K2 12 페이지.
Parts List
1 SDXN146K2 Function Decoder with SoundFX
1 Instruction Sheet
Installation Information
See the Digitrax Decoder Manual for complete decoder test procedures, instal-
lation instructions, programming and technical information. Digitrax manuals
and instructions are updated periodically. Please visit www.digitrax.com for the
latest versions, technical updates and additional locomotive-specific installation
instructions. CAUTION: Programming and layout track must not exceed
16V when using this decoder.
Installation Instructions
1.
Carefully remove the Locomotive shell.
2.
Remove the Factory Light board by sliding it back and up.
Figure 1: SDXN146K2: Locomotive with light board and motor clips removed
3.
Place insulating tape in the Motor Saddle Area to ensure the motor clips do
not touch the locomotive frame.
4.
Reinstall the SDXN146K2 by sliding it under the retention tabs on the frame.
Ensure that the motor clips are in contact with the motor tabs on the loco-
motive. Also ensure the motor clips are NOT in contact with the Locomotive
frame.
5.
Place the speaker and the capacitor on the rear of the locomotive frame.
Double sided tape can be used to help hold these items in place. Fold and
shape any excess wire so that it lays flat. See Figure 2 to see completed
installation.
© 2016 Digitrax, Inc.
Motor Tab
— 2 —
®
Motor Saddle Area
www.digitrax.com