Digitrax SoundFX SDXN146K2 매뉴얼 - 페이지 7

{카테고리_이름} Digitrax SoundFX SDXN146K2에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Digitrax SoundFX SDXN146K2 12 페이지.

페이지 인쇄
Digitrax SoundFX SDXN146K2 매뉴얼
Changing the Sound Scheme on your SDXN146K2 CV60,
150, 157
The SDXN146K2 comes preloaded with 8 different sound schemes, 6 die-
sel and 2 Steam. These schemes can be selected using CV60. Each diesel
scheme can be configured with one of 8 different horns using CV150 and
one of 4 different bells using CV157. Each Steam scheme can be config-
ured with one of 3 whistles using CV150 and one of 4 bells using CV157.
To enable playable volume for your selected horn or whistle add 128 to
the selected value (ex. Playable volume on horn 2 is enabled with a value
of 130, 02+128=130)
CV60
Sound Scheme
set to
0
GP38 Diesel
GE Evolution
1
Diesel
2
SD70 Diesel
3
GP10 Diesel
4
RS1 Diesel
5
C420 Diesel
Steam type 1
6
(based on 3985)
Steam type 2
7
(based on K27)
Loading Other Sound Schemes in your SDXN146K2
The decoder's sound scheme can be changed using a Digitrax PR3 pro-
grammer and your computer with the SoundLoader 2.0 software. Both
the software and a number of alternate sound project files are available
from the Digitrax Sound Depot web site. It takes only a few minutes to
download the new sound to your decoder. The following tables show the
CVs used in this decoder version and how it is set up at the factory to
operate various sounds using your throttle. (Table on next page.)
© 2016 Digitrax, Inc.
CV150 set to
0= default 1-7= alt horns
128-135 = Playable horns
0= default 1-7= alt horns
128-135 = Playable horns
0= default 1-7= alt horns
128-135 = Playable horns
0= default 1-7= alt horns
128-135 = Playable horns
0= default 1-7= alt horns
128-135 = Playable horns
0= default 1-7= alt horns
128-135 = Playable horns
0= default
1-2= alt whistles
128-130 = Playable whistles
0= default
1-2= alt whistles
128-130 = Playable whistles
— 7 —
CV157 set to
0=default
1-3 = alt bells
0=default
1-3 = alt bells
0=default
1-3 = alt bells
0=default
1-3 = alt bells
0=default
1-3 = alt bells
0=default
1-3 = alt bells
0=default
1-3 = alt bells
0=default
1-3 = alt bells
www.digitrax.com