3Com Baseline 2824 사용자 설명서 - 페이지 6

{카테고리_이름} 3Com Baseline 2824에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. 3Com Baseline 2824 9 페이지. Baseline switches
3Com Baseline 2824에 대해서도 마찬가지입니다: 제품 설명서 (13 페이지), 데이터시트 (2 페이지), 데이터시트 (2 페이지), 데이터시트 (2 페이지), 데이터시트 (4 페이지)

페이지 인쇄

ECHNICAL

Related Standards

The 3Com Switch 2824/3Com Switch 2816 has been designed

to meet the following standards:

Functional

ISO 8802-3, IEEE 802.3 (Ethernet), IEEE 802.3u (Fast

Ethernet), IEEE 802.3ab (Gigabit Ethernet), IEEE 802.3x

(Flow control on full duplex links), IEEE 802.3d

(Bridging), IEEE 802.1p (VLAN tagging/ priority queuing)

Safety

UL 60950, EN 60950, CSA 22.2 #60950, IEC 60950

EMC Emissions EN 55022 Class A, FCC Part 15 Subpart B Class A,

ICES-003 Class A, VCCI Class A, AS/NZS 3548 Class A,

CNS 13438 Class A

Immunity

EN 55024

Environmental

Operating

0–45 °C (32–113 °F)

Temperature

Humidity

10–95% (non-condensing)

EGULATORY

FCC Statement

This equipment has been tested and found to comply with the

limits for a Class A digital device, pursuant to part 15 of the FCC

rules. These limits are designed to provide reasonable protection

against harmful interference when the equipment is operated in

a commercial environment. This equipment generates, uses and

can radiate radio frequency energy and, if not installed and used

in accordance with the instructions, may cause harmful

interference to radio communications. Operation of this

equipment in a residential area is likely to cause harmful

interference to radio communications, in which case the user will

be required to correct the interference at their own expense.

Information To The User

If this equipment does cause interference to radio or television

reception, which can be determined by turning the equipment

off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

Reorient the receiving antenna

Relocate the equipment in relation to the receiver.

Move the equipment away from the receiver.

Plug the equipment into a different outlet so that equipment

and receiver are on different branch circuits.

If necessary, the user should consult the dealer or an experienced

radio/television technician for additional suggestions. The user

may find the following booklet prepared by the Federal

Communications Commission helpful:

How to Identify and Resolve Radio-TV Interference Problems

This booklet is available from the U.S. Government Printing

Office, Washington,

DC 20402, Stock No. 004-000-00345-4.

In order to meet FCC emissions limits, this equipment must be

used only with cables which comply with IEEE 802.3.

NFORMATION

OTICES

Physical

Width

440 mm (17.3 in.)

Depth

173 mm (6.8 in.)

Height

43.6 mm (1.7 in.) or 1U

Weight

Switch 2824: 1.96 kg (4.32 lb)

Switch 2816: 1.87 kg (4.12 lb)

Mounting

Free standing, or 19-inch rack mounted using

the mounting kit supplied

Electrical

Power Inlet

IEC 320

AC Line Frequency 47 to 63 Hz

Input Voltage

100–240 VAC

Current Rating

0.4 A at 115 V, 0.2 A at 230 V

Maximum Power

Switch 2824: 45.7W

Consumption

Switch 2816: 36.5W

Maximum Power

Switch 2824: 156 BTU/hr

Dissipation

Switch 2816: 124.6 BTU/hr

CE Statement (Europe)

This product complies with the European Low Voltage Directive

73/23/EEC and EMC Directive 89/336/EEC as amended by

European Directive 93/68/EEC/.

Warning: This is a Class A product. In a domestic

environment, this product may cause radio interference in

which case the user may be required to take adequate

measures.

CSA Statement

This Class A digital apparatus meets all requirements of the

Canadian Interference-Causing Equipment Regulations.

Cet appareil numérique de la classe A respecte toutes les

exigences du Règlement sur le matériel brouilleur du Canada.

VCCI Statement

BSMI Statement