Digitrax DN166I1B 빠른 시작 매뉴얼 - 페이지 6

{카테고리_이름} Digitrax DN166I1B에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Digitrax DN166I1B 8 페이지. Complete train control

Function Outputs on the DN166I1B

The DN166I1B is set up at the factory to control six functions. The unit has two

sets of outputs for directional lighting. Pads F0F/F0F+ are for the front light and

F0R/F0R+ for the rear light. Functions F1 , F2 , F3 and F4 can be used by sol-

dering a wire from the pad for the function you wish to use to the lamp (or other

function) you wish to control.

Forward or Reverse direction of travel, or

Whether F0 is on or off, or

Both direction of travel and whether F0 is on or off, or

Whether the locomotive is stopped or moving.

F2+

F0F

F0F+

F4+

Function Remapping

Function remapping allows you to program the function outputs of your decoder

to be controlled by selected function keys on your throttle. Please consult the

Digitrax Decoder Manual or website for information on function remapping.

F3+

F1+

— 6 —

www.digitrax.com

F0R

F0R+