argon audio BT2 MK2 빠른 시작 - 페이지 2
{카테고리_이름} argon audio BT2 MK2에 대한 빠른 시작을 온라인으로 검색하거나 PDF를 다운로드하세요. argon audio BT2 MK2 2 페이지.
페이지 인쇄Quick start
1. Connect the power supply to the Argon Audio
BT2 and connect the power supply to a power
outlet.
2. Connect the BT2 to an Amplifier, using either the
(included) RCA cable, a mini jack cable or an
optical cable.
3.
The small LED light on the front of Argon Audio
BT2 will turn Red, indicating its in Stand-by mode
4. Enable Bluetooth on your playback device
(Mobile Phone, Tablet, Lap Top etc.).
5. Turn ON Argon Audio BT2, by pressing the
Power button on the back.
6.
The LED on the front of Argon Audio BT2 will turn
Blue and start blinking fast. Now waiting to
connect to a BT device. (Mobile Phone, Tablet,
Lap Top etc.)
7.
Start Bluetooth device search on your playback
device (Mobile Phone, Tablet, Lap Top etc.).
8.
Once "Argon Audio BT2" is found and shows in
the display of your device – depending on your
device, it either:
a.
Connects automatically indicating
"Connected to Media Audio" or.
b. "Ask" to be Paired
9. If it shows "Connected to Media Audio" you are
10. If it ask to be Paired press "Argon Audio BT2 on
11. Then Press "Argon Audio BT2" on your device
12. Notice you can adjust the volume both on your
w w w . a r g o n a u d i o . c o m
B T 2 M K 2 Q u i c k s t a r t
ready for playback.
your device and it will show "Paired".
again and it will Connect.
playback device (Mobile Phone, Tablet, Lap Top
etc.). and on your Amplifier.
LED light indicator
No light = Off
Red = Stand-by
Fast Blinking Blue = Waiting for
Pairing/Connect
Slow Blinking Blue = Time out for
connection.
To activate again, press Power twice until
you either get fast blinking Blue or Constant
Blue LED
Constant Blue = Connected