argon audio SUB640 소유자 매뉴얼 - 페이지 7

{카테고리_이름} argon audio SUB640에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. argon audio SUB640 7 페이지.

Specifications

Type: Reflex type cabinet

Speaker: 1 woofer Driver

Inputs: L/R RCA stereo input, speaker input from amplifier

Output: Low level line out

Main voltage: 220-240V, 50/60Hz

Amplifier type: Analogue Hi-Fi Amplifier

Woofer: 6 1/2" Long stroke Woofer Speaker

Phase regulation: yes 0-180 degrees

Volume regulations: yes

Auto stand-by: yes after 10 min.

Frequency Response: (-3db): 50Hz-200Hz

Cross over Frequency: 40-200Hz adjustable

Output Power: 1x65W (RMS)

Weight: 6,5 kg

w w w . a r g o n a u d i o . c o m

SUB640

Troubleshooting

Basic troubleshooting

If the LED indicator lamp does not light up, check...

that the power cord (10) is firmly plugged into the wall outlet

that the POWER switch (9) on the rear panel is ON

that the mains voltage is correct and matching the

subwoofer

the fuse, if fuse (5) need to be replaced only use same

type and value

If no sound, check...

that the subwoofer is turned on (indicator LED lamp

glows blue)

that the VOLUME control (1) on the rear panel is not all

the way down

that the input cable (5) or (6) is firmly plugged in both

subwoofer and amplifier

that the subwoofer gets a signal from the amplifier - check

tone on most av-receivers