B.M.C. M2 소유자 매뉴얼
{카테고리_이름} B.M.C. M2에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. B.M.C. M2 8 페이지.
페이지 인쇄B.M.C. Audio M2
Quick Start
Attention! The M2 has two different modes of operation, depending on whether an optical
DIGM signal is present or not: It features adjustable gain in DIGM mode, or maximum
gain, which is typical for traditional power amplifiers! The latter gain is usually too much if
the signal comes from a fixed level output source. The XLR-CI input is only activated if an
optical DIGM signal is present. This is the safest mode of DIGM operation (See pages 6 – 8).
POWER
Input Indicator
Power (Turn)
DIGM DIsplay
SPEAKER
INPUT
INPUT
XLR-C1
XLR
AC POWER
RCA
SERIAL NO.:
Traditional Power Amplifier Mode
Speaker Binding Post
XLR Input
RCA Input
AC Power Input
Without active optical DIGM signal the M2
is a traditional power amplifier with typical
power amplifier gain, which equals the
M2's maximal amplification (DIGM 66).
Find detailed descriptions and illustrations within this manual.
1302-EN
INPUT
Input (Turn)
Power Meter
MONO POWER AMPLIFIER
OPTO CONTROL
LOOP OUTPUT
SPEAKER BI-WIRE
LOOP
IN
OUT
OUTPUT
XLR
XLR-CI
PHASE
50/60Hz
WEEE - Reg. - Nr.:
DE18339144
B.M.C. AUDIO
MADE BY B.M.C. AUDIO GERMANY
DIGM Mode
Speaker Binding Post
XLR-CI Input
Optical DIGM Input
AC Power Input
To work in DIGM Mode the M2 needs an
optical waveguide connection to a B.M.C.
Audio unit with DIGM control, such as the
DAC1, and this unit must be switched on!
M2
Owner's Manual
POWER
INPUT