Cisco PIX 506E 빠른 시작 매뉴얼 - 페이지 6

{카테고리_이름} Cisco PIX 506E에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco PIX 506E 17 페이지. Chapter 3
Cisco PIX 506E에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (18 페이지), 사용자 설명서 (8 페이지)

페이지 인쇄

Configuring the PIX 506E

The PIX 506E comes with a factory default configuration that meets the needs of most broadband

networking environments. The factory default configuration on the PIX 506E protects your inside

network from any unsolicited traffic. It is configured to use DHCP on the outside interface to acquire an

IP address. A default DHCP server address pool is included for hosts on the inside interface.

Instances in which it might be necessary to change or make additional changes to the default

configuration include the following:

• To create administrative and Telnet passwords

Note

We highly recommend that you change the administrative and Telnet passwords from

their default settings to secure the administration of the PIX Firewall.

• To configure Point-to-Point Protocol over Ethernet (PPPoE) or a static IP address for an outside

interface

• To configure VPN and Auto Update features

The PIX 506E contains an integrated configuration utility

called Cisco PIX Device Manager (PDM). PDM is a web

browser-based configuration tool designed to help you set

up, configure, and monitor the PIX Firewall. PDM is

preinstalled on the PIX 506E. To access PDM, make

sure JavaScript and Java are enabled in your web

browser. For best performance, we recommend that

you use Microsoft Internet Explorer 5.5 or a higher

release. Refer to the Cisco PIX Device Manager

Installation Guide for more information on operating

system and web browser environments supported by

PDM