Cisco PIX-515E 빠른 시작 매뉴얼 - 페이지 9

{카테고리_이름} Cisco PIX-515E에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco PIX-515E 42 페이지. Security appliance
Cisco PIX-515E에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (42 페이지)

페이지 인쇄

b. Click the Range radio button to enter the IP address range.

c. Because the range of IP addresses for the DMZ interface is 30.30.30.50– 30.30.30.60, enter

these values in the two fields.

d. Enter a unique Pool ID (in this case, enter 200).

e. Click the OK button to go back to the Manage Global Address Pools window.

You can also select PAT or PAT using the IP address of the interface if there are limited IP

Note

addresses available for the DMZ interface.

Because there are only two public IP addresses available, with one reserved for the DMZ server, all

traffic initiated by the inside HTTP client exits the PIX 515E using the outside interface IP address.

This allows traffic from the inside client to be routed to and from the Internet.

In the Manage Global Address Pools window:

a. Select the outside interface.

b. Click the Add button.