Cisco RSP4+ Bootflash Memory Upgrade to 16MB MEM-16F-RSP4+= 설치 및 구성 매뉴얼 - 페이지 10
{카테고리_이름} Cisco RSP4+ Bootflash Memory Upgrade to 16MB MEM-16F-RSP4+=에 대한 설치 및 구성 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco RSP4+ Bootflash Memory Upgrade to 16MB MEM-16F-RSP4+= 20 페이지. Bootflash memory upgrade to 16mb
페이지 인쇄Removing the RSP4+
Use the RSP4+ handle to carefully pull it straight out of the slot, keeping your other hand under the
Step 6
carrier to guide it. (See Figure 2.) Keep the RSP4+ parallel to the backplane. Avoid touching the board
or any connector pins.
Step 7
Place the removed RSP4+ on an antistatic mat or foam pad for installation later in this procedure.
Figure 1
RSP4+ Bootflash Memory Upgrade to 16MB Installation and Configuration Guide
10
Ejector Levers and Captive Installation Screws on the RSP4+—Vertical Orientation Shown
Bottom ejector lever
Processor
Processor module
slot
module
carrier guide
STOP!
on contact
c
78-12288-02