Cisco RSP7000 설치 - 페이지 16
{카테고리_이름} Cisco RSP7000에 대한 설치을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco RSP7000 26 페이지. Upgrade kit in the cisco 7000 series routers
Cisco RSP7000에 대해서도 마찬가지입니다: 설치 및 구성 매뉴얼 (48 페이지)
페이지 인쇄Installing the RSP7000 Upgrade Kit
Installing the RSP7000 Upgrade Kit
Following is a overview of the procedures for installing the RSP7000 upgrade kit in the Cisco 700
chassis.
RSP7000 Upgrade Kit Installation Overview
To install the RSP7000 upgrade kit, the following overview indicates the procedures that are
required, after the router is powered down:
1
Caution
RSP7000 upgrade procedures. The RP, SP (or SSP), RSP7000, and RSP7000CI do not support
online insertion and removal (OIR), so power to the chassis must be turned OFF before attempting
to remove or install these processor modules.
2
3
4
5
6
16 Installing the RSP7000 Upgrade Kit in the Cisco 7000 Series Routers
Turn off power to the chassis.
To prevent system problems, turn off power to your chassis before proceeding with the
Remove the RP from slot 6 of the Cisco 7000 or slot 4 of the Cisco 7010.
Install the RSP7000CI in the 7000 CI slot of your chassis.
Remove the SP (or SSP) from slot 5 of the Cisco 7000 or slot 3 of the Cisco 7010.
Install the RSP7000 in the 7000 RSP slot of your chassis.
Power on the router for an installation check.