Cisco RSP7000 설치 - 페이지 2

{카테고리_이름} Cisco RSP7000에 대한 설치을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco RSP7000 26 페이지. Upgrade kit in the cisco 7000 series routers
Cisco RSP7000에 대해서도 마찬가지입니다: 설치 및 구성 매뉴얼 (48 페이지)

페이지 인쇄

Product Overview

Following are brief descriptions of the Cisco 7000 and Cisco 7010 routers, the RSP7000, and the

RSP7000CI.

What Is the Cisco 7000?

The Cisco 7000 is a seven-slot router chassis, which uses the new RSP7000. The Cisco 7000

provides up to ﬁve interface processor slots, and can accommodate the following CxBus-based

interface processors: Fast Ethernet, Ethernet, Token Ring, Fiber Distributed Data Interface (FDDI),

channel attachment, multichannel, serial, and so forth. The 7000 RSP and interface processors are

keyed with guides on the backplane to prevent them from being fully inserted in the wrong slot.

Figure 1 shows the rear of the Cisco 7000 router with the RSP7000 and RSP7000CI installed. In the

Cisco 7000 series, two slots are reserved for the 7000 Route Switch Processor (RSP7000), which

contains the system processor and performs packet switching functions, and the 7000 Chassis

Interface (RSP7000CI) board, which contains all of the environmental monitoring functions for the

Cisco 7000, when conﬁgured with the new 7000 RSP. The remaining slots (0 through 4) are for

interface processor.

Figure 1

Captive

installation screw

Upper

power supply

Captive

installation screw

Lower

power supply

2 Installing the RSP7000 Upgrade Kit in the Cisco 7000 Series Routers

Cisco 7000 with RSP7000 and RSP7000CI Installed

Interface processor slots

RSP

7000

slot 5

RSP

7000CI

slot 6