AcueLighting Magic PAR 21 RGBW 사용자 설명서 - 페이지 3

{카테고리_이름} AcueLighting Magic PAR 21 RGBW에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AcueLighting Magic PAR 21 RGBW 4 페이지.

INSTALLATION

After removing the fixture from the packaging, check

if the fixture was not damaged during transport. Before

connecting to the mains, make sure that the device is

securely mounted. The manufacturer is not responsible

for damage caused by unstable mounting.

Ensure proper connection to the mains and proper

grounding. Make sure that the electrical parameters are

consistent with device requirements. All activities,

including connecting the device to the mains must be

performed by qualified personnel.

CONNECTIONS

The device is equipped with the following interfaces:

1. DMX (in/out): XLR 3-pin

2. Power (in/out): integrated power cord/dedicated

IP65 plug

4.1

Connecting DMX signal

The connection is performed using cable with

XLR-female -> XLR-Male plugs.

4.2 Voltage specification

Input Voltage: 95~240V

Max Power Draw: 270w

4.3 Connecting power supply

The connection is performed using Powercon power

cable (included). The device must be operated by

qualified personnel. Make sure that the power grid

supply parameters are consistent with device

parameters and limitations are not exceeded.

CAUTION!

In the case of cable damage do not attempt to repair.

Replacement or repair can be made only

by the manufacturer or by a person with appropriate

permissions.

Manual Operation

5.1 Control panel

The control panel is equipped with LED - 4 characters

display and 4 control buttons with the following

functions:

1. MENU – enter to main menu, go back from the

selected options, cancel changes

2. DOWN – choose option, edit parameter

3. UP – choose option, edit parameter

4. ENTER edit selected option, confirm changes