Cisco SG 100-16 빠른 시작 매뉴얼 - 페이지 6

{카테고리_이름} Cisco SG 100-16에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco SG 100-16 13 페이지. Unmanaged rackmount switches

To connect the unmanaged rackmount switch to the network:

Connect the Ethernet cable to the Ethernet port of a computer,

TEP

printer, network storage, or other network device.

Connect the other end of the network Ethernet cable to one of the

TEP

numbered unmanaged rackmount switch Ethernet ports.

The LED of the port lights if the device connected is active.

If the uplink from one unmanaged, cascaded switch to another is

OTE

moved from one port to another port, it can take up to five

minutes for full network operation to resume. This is normal and

expected behavior.

Repeat

TEP

the unmanaged rackmount switch.

To prioritize voice or video traffic by using the QoS feature on the

OTE

switch, set flow control to off in the configurations of the

connected devices. Otherwise, flow control might send a pause

frame to the switch, blocking the high-priority QoS packets

queued on the port. On some devices, such as some IP phones

and IP cameras, flow control might not be configurable.

Connect the power cord to the switch and a power source.

TEP

Step 1

and

Step 2

for each device you want to connect to

Cisco Unmanaged Rackmount Switches