Cisco Small Business SPA8000 재구성 매뉴얼

{카테고리_이름} Cisco Small Business SPA8000에 대한 재구성 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco Small Business SPA8000 2 페이지. 8-port telephony gateway sip trunking configuration guide
Cisco Small Business SPA8000에 대해서도 마찬가지입니다: 빠른 설치 (11 페이지), 구성 매뉴얼 (16 페이지)

페이지 인쇄

WARNING: THIS PROCEDURE DESCRIBES HOW TO MANUALLY RECONFIGURE A CISCO ATA SPA 2102

AND 8000 TO WORK ON THE BROADSOFT BROADCLOUD PBX NETWORK. ONCE THIS PROCEDURE

HAS BEEN COMPLETED, ANY PRIOR CONFIGURATION SETTINGS ON THE DEVICE WILL BE

OVERRIDDEN, INCLUDING THE ADMINISTRATOR PASSWORD, AND THE DEVICE WILL ONLY BE

USABLE ON THE BROADSOFT BROADCLOUD PBX NETWORK. THE DEVICE MUST BE RETURNED TO

THE CISCO FACTORY DEFAULT CONFIGURATION BEFORE IT CAN BE USED ON ANY NETWORK OTHER

THEN BROADSOFT BROADCLOUD PBX.

For Models: SPA2102 and 8000

1. Connect an analog phone into line one of the device

2. Press the start key four times "****"

3. Press "110#" and record the IP address

4. From a browser on the same LAN, enter the IP address recorded in step 3

Note:

• If prompted for a user and password, enter it now. Then click admin and enter the

admin

user and password.

• For 2102 only. If the browser does not take you to the SPA webpage, you must

activate

the web utility. Redo step 2 and then enter "7932#", "1#"' "1"

5. Click the admin link in the top right of the page

6. Click the advanced link in the top right of the page

7. Click the "Voice" tab

8. Click the "Provisioning" tab

9. Enter the following link in "Profile Rule"

North America: **

For All Devices - Enter

** If you are having trouble flashing your device with these URLs, please contact

your technical support team for assistance.

Europe (only SPA8000):

https://spa.sipflash.com/

https://spa.broadcloud.eu/

Cisco SPA2102 and 8000 ATA

Manual Reconfiguration Guide