Argos 266/7355 조립 지침 매뉴얼 - 페이지 14

{카테고리_이름} Argos 266/7355에 대한 조립 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Argos 266/7355 20 페이지.

페이지 인쇄

Assembly Instructions

Step 20

Drill a handle hole in

each door

Important: Please follow

these instructions

carefully.

Lay the 2 doors

down onto a smooth

surface.

Check that the hinges

and holes are in the

same place as the

diagrams.

Note: We recommend

the use of a small piece

of waste wood, placed

behind the hole while

drilling, to reduce the

possibility of any

breakout.

Using the pilot hole in

the rear face of the door,

drill through the hole

indicated opposite, using

a 2.5mm diameter drill.

Turn the door over and

open out the 2.5mm hole

that you have just drilled

by drilling back through it

with a 5mm drill.

IMPORTANT

Carefully choose which hole

you need to drill in each door

ONLY drill this

hole in 1 door

x 1

This will be

the left door

x 1

This will be

the right door

Small piece of

waste wood

ONLY drill this

hole in 1 door

Small piece of

waste wood