Digitus 4016032468639 사용자 설명서 - 페이지 8

{카테고리_이름} Digitus 4016032468639에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Digitus 4016032468639 16 페이지. Kvm switch, 4-port, single display, 4k, hdmi

Chapter 2

KVM switches can be placed on any suitable surface, and is sufficient to safely

support the weight of the device plus the additional cable; clean and make sure that

no other plane debris would affect the switch ventilation and normal operation.

To install For a 4 port desktop KVM device, follow these steps:

1. Plug the USB keyboard and USB mouse into the USB console port on the rear

panel of the device.

2. Plug HDMI display into the console video port on the rear panel of the device.

3. If you use a separate speaker and microphone, plug it into the console analog

audio port on the rear panel of the device.

4. With a custom KVM cable set, The KVM cable connector and the

included USB connector are plugged into the corresponding jacks on the rear

panel of the switch.

5. Put the other end of the cable, video and plug the USB cable into the

corresponding USB and graphics video interface on your computer.

6. Insert the USB peripheral into the Type A jack (one on the front panel;

the other two on the rear panel)

7. Turn on the monitor.

8. KVM is powered by computer USB port. To turn on computer to activate

KVM switch. (For external power supply, which is optional.

Please use DC 9V power supply)

9. Turn on your computer