Cisco TelePresence Server 7010 교체 지침 매뉴얼 - 페이지 7

{카테고리_이름} Cisco TelePresence Server 7010에 대한 교체 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco TelePresence Server 7010 23 페이지. 600w ac-input power supply and fan tray replacement
Cisco TelePresence Server 7010에 대해서도 마찬가지입니다: 설치 지침 매뉴얼 (15 페이지), 설치 매뉴얼 (14 페이지), 시작하기 (16 페이지), 교체 지침 매뉴얼 (18 페이지)

페이지 인쇄

Cisco TelePresence Server 7010 교체 지침 매뉴얼

If these conditions are not true, for instance, if you must remove a rack-mounted chassis

Note

before you can install the new chassis, you must disconnect all power and network interface cables.

Also, ensure that your new chassis allows sufﬁcient clearance for maintenance: to remove and

replace processor modules and interface cables at the interface processor end, and to access the

internal components at the noninterface processor end. Figure 4 shows the chassis footprint and the

clearance required to remove or install each of the major components.

Figure 4

Chassis Footprint and Clearance Requirements for Maintenance

2 in.

(5.08 cm)

Chassis foot C

14.25 in. (36.20 cm)

Power supply width

14.60 in. to ears (37.08 cm)

Noninterface processor end

Interface processor end

Interface processor width

14.55 in. (36.96 cm)

Chassis width

17.50 in. (44.45 cm)

Cisco 7010 and Cisco 7505 Chassis Replacement Instructions

Prerequisites

1.25 in. (3.18 cm)