Cisco UBR7246VXR 하드웨어 설치 - 페이지 3

{카테고리_이름} Cisco UBR7246VXR에 대한 하드웨어 설치을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco UBR7246VXR 25 페이지. Universal broadband router
Cisco UBR7246VXR에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (27 페이지), 사용자 설명서 (7 페이지), 설치 매뉴얼 (28 페이지)

페이지 인쇄

Overview

The Cisco uBR7246VXR universal broadband router is used in Cisco Cable Modem Termination System (CMTS) solutions. The

router allows high-speed data services to be packaged similar to basic cable television service or video fare.

The Cisco uBR7246VXR router:

• Supports data and packetized voice connectivity over a bidirectional cable television and IP backbone network.

• Supports high-speed Internet access, IP telephony, and Virtual Private Network (VPN) applications.

• PacketCable 1.0, Data-over-Cable Service Interface Specification (DOCSIS) 1.1 and EuroDOCSIS 1.1 qualified.

• Supports DOCSIS- or EuroDOCSIS-based cable interfaces and cable modems (or set-top boxes with integrated DOCSIS or

EuroDOCSIS cable modems).

• Supports both 6-MHz North American channel plans using ITU-T J.83 Annex B operation and 8-MHz phase alternating

line (PAL) and SEquential Coulour Avec Memoire (SECAM) channel plans using ITU-T J.83 Annex A operation.

• Works in conjunction with dialup access products to support upstream traffic from DOCSIS-based cable interfaces

connected to the public switched telephone network (PSTN).

• Includes environmental monitoring and reporting functions.

• Supports online insertion and removal (OIR). However, the I/O controller, network processing engine (NPE), and clock card

do not support OIR. You must power down the chassis before removing these components.

• Is fully radio frequency (RF) hardened to ensure virtually noise-free transmission.

• Supports N + 1 redundancy solutions using the Cisco RF switch.

• Supports 1+1 interchassis redundancy (does not require the RF switch).

The Cisco uBR7246VXR routers may be installed on a tabletop or rack-mounted. A rack-mount kit ships from the factory with

each router. The rack-mount kit includes the hardware used to mount the router in a standard 19-inch equipment rack or

relay-type rack.

Warning

Only trained and qualified personnel should be allowed to install, replace, or service this equipment.

Statement 1030

For translations of the warnings used in this document, see the Cisco uBR7200 Series Regulatory Compliance and Safety

Information document that comes with this router. Reference the translations by statement number (example: Statement 1020).

Cisco uBR7246VXR Components

The Cisco uBR7246VXR universal broadband router components include:

• Cable interface line cards (also called line cards) that interface to the cable television network.

• Port adapters that connect to the IP backbone and external networks.

• A fan tray, enclosing internal fans that draw cooling air into the chassis to maintain an acceptable operating temperature.

• AC or DC power supplies–the Cisco uBR7246VXR supports an optional redundant power supply.

• A Cisco cable clock card that allows you to lock onto and propagate a T1 clock signal throughout the router midplane.

• One network processing engine (NPE) that performs system management functions for the chassis.

• An I/O controller that shares the system memory functions and the environmental monitoring functions with the network

processing engine.

Note

The I/O controller is not required if you are using the Cisco uBR7200-NPE-G1 network processing engine.

For specific instructions to install, remove, or replace system components, refer to the Configuration Notes directory at the

following URL:

http://www.cisco.com/univercd/cc/td/doc/product/cable/cab_rout/cfig_nts/index.htm