Cisco VIP4-50= 설치 및 구성 매뉴얼 - 페이지 16

{카테고리_이름} Cisco VIP4-50=에 대한 설치 및 구성 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco VIP4-50= 44 페이지. Fourth generation versatile interface processor

VIP4 Installation Procedures

You can remove and replace interface processors (such as the VIP4) while the system is operating, with

minimal disruption.When an interface processor is added or removed, the switching complex is paused

while the internal data structures are rebuilt for the new interface configuration. During this time, packets

are not switched through the system. However, routing adjacencies and forwarding entries are

maintained throughout the insertion and removal process.

After a VIP4 is reinstalled, the system brings online only interfaces that match the current configuration

and were previously configured as up; all others require that you configure them with the configure

command. For more information on the configure command, refer to the documentation of the specific

port adapter or interface processor that you are installing.

Figure 2

shows a detail of the ejector lever mechanism on the ends of the interface processor. Use the

ejector levers when removing an interface processor to ensure that the backplane connector pins

disconnect from the interface processor in the sequence expected by the system. Any interface processor

that is only partially connected to the backplane can hang the bus.

Fourth Generation Versatile Interface Processor (VIP4) Installation and Configuration Guide

OL-3673-01