Epson 2480 - Perfection Photo 빠른 시작 매뉴얼 - 페이지 5

{카테고리_이름} Epson 2480 - Perfection Photo에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson 2480 - Perfection Photo 8 페이지. Scanning application force quits on mac os 10.4
Epson 2480 - Perfection Photo에 대해서도 마찬가지입니다: 제품 정보 매뉴얼 (6 페이지), 제품 지원 게시판 (1 페이지), 업데이트 매뉴얼 (2 페이지), 중요 안전 지침 (4 페이지), 설정 매뉴얼 (4 페이지), 제품 지원 게시판 (23 페이지), 매뉴얼 (11 페이지), 업데이트 (1 페이지), 제품 지원 게시판 (40 페이지), 제품 지원 게시판 (24 페이지), 제품 지원 게시판 (29 페이지), 제품 지원 게시판 (8 페이지), 제품 지원 게시판 (3 페이지), 제품 지원 게시판 (14 페이지), 제품 지원 게시판 (12 페이지), 제품 지원 게시판 (40 페이지), 제품 지원 게시판 (11 페이지), 제품 지원 게시판 (40 페이지), 제품 지원 게시판 (22 페이지), 제품 지원 게시판 (12 페이지), 제품 지원 게시판 (21 페이지)

페이지 인쇄

Scanning Film or Slides

Tip: Make sure your negatives or slides are dust-free for the

best scan. You can also select the Dust Removal setting in

Epson Scan to improve your scan.

Perfection 2480 Photo

If you have the Perfection 2480 Photo, its cover has a built-in transparency unit

(TPU). To scan film or slides, you'll need to remove the reflective document mat

from the cover and place the film or slides in a holder on the scanner glass.

Lift the scanner cover all the way up and slide

the reflective document mat up and off of the

scanner cover.

Note: Make sure the transparency

unit cable is connected to the back

of the scanner (see step 4 in

"Connect the Scanner").

If you're scanning film, slide it into the

film holder with the shiny base side

facing down. Your images and any

wording on the film strip should

appear backwards on the side that

faces up.

Place the film holder in the correct position for your film or slides.

For slides, place the holder on the scanner first, then place the slides in the

holder. Match the letter on the film holder tab with the corresponding letter

on the scanner.

A Negatives

Scans the first 3 frames of the film strip

in the 1, 2, and 3 spots on the holder.

C Slides

Place the holder on the scanner glass,

then put the slides in the holder. For a

landscape-oriented slide, place the top of

the image toward the left. For a portrait-

oriented slide, place the top of the image

toward the top of the scanner.

Note: Make sure the thin, rectangular calibration windows on both ends of

the film holder are uncovered to ensure an accurate scan.

Close the scanner cover.

To scan each film frame or slide as a separate image, press the 4 Scan

and Save button or open Epson Smart Panel and select Scan and Save.

This scans each frame or slide using ideal settings in Full Auto Mode and

opens each one separately in ArcSoft PhotoImpression for viewing, editing,

and printing. See your on-screen Reference Guide and Smart Panel help for

instructions on selecting scan modes and complete scanning details.

When you're finished scanning, you can store the film holder in the scanner

cover. Slide the film holder into the cover, then replace the document mat.

B Negatives

Scans the last 3 frames of the film strip

in the 4, 5, and 6 spots on the holder.