Cisco 2500 Series 시작하기 매뉴얼 - 페이지 13

{카테고리_이름} Cisco 2500 Series에 대한 시작하기 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 2500 Series 47 페이지. Wireless controller
Cisco 2500 Series에 대해서도 마찬가지입니다: 설치 매뉴얼 (12 페이지), 구성 매뉴얼 (19 페이지), 배포 매뉴얼 (23 페이지), 구성 매뉴얼 (50 페이지)

페이지 인쇄

Read the wall-mounting carefully before beginning installation. Failure to use the correct hardware

Warning

or to follow the correct procedures could result in a hazardous situation to people and damage to the

system. Statement 378

To mount the controller on a wall using rack-mount brackets, follow these steps:

Step 1

Attach the 19-inch brackets to each side of the 2504 controller as shown in

head screws provided in the kit.

Figure 5

BASE MOUNT

#10-32 flat head screws (mounting screws for each side of the controller)

Step 2

Mount the 2504 controller on the wall with the front panel facing down, as shown

For the best support of the controller and cables, make sure the controller is attached securely to wall

studs or to a firmly attached plywood mounting backboard.

Installing the Rack-Mount Brackets to the Sides of the Controller

Cisco 2500 Series Wireless Controller Getting Started Guide

Installing the Controller

Figure 5

with #10-32 flat

Figure