Epson 4490 - Perfection Photo 제품 정보 매뉴얼 - 페이지 6

{카테고리_이름} Epson 4490 - Perfection Photo에 대한 제품 정보 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson 4490 - Perfection Photo 11 페이지. Scanning application force quits on mac os 10.4
Epson 4490 - Perfection Photo에 대해서도 마찬가지입니다: 빠른 시작 (4 페이지), 제품 지원 게시판 (23 페이지), 업데이트 (1 페이지), 제품 지원 게시판 (40 페이지), 제품 지원 게시판 (24 페이지), 제품 지원 게시판 (29 페이지), 제품 지원 게시판 (8 페이지), 제품 지원 게시판 (3 페이지), 중요 안전 지침 (4 페이지), 제품 지원 게시판 (14 페이지), 제품 지원 게시판 (12 페이지), 제품 지원 게시판 (40 페이지), 제품 지원 게시판 (11 페이지), 제품 지원 게시판 (40 페이지), 제품 지원 게시판 (22 페이지), 제품 지원 게시판 (12 페이지), 제품 지원 게시판 (21 페이지), 사용자 설명서 (30 페이지), 여기에서 시작 (4 페이지)

페이지 인쇄

Epson Perfection 4490 Photo

4. Place the film holder on the document table so that it is

aligned with the upper left corner. Make sure the tab

labelled "A" on the film holder fits into the area labelled "A"

on the scanner.

5. Make sure you removed the document mat. See "Removing

the Document Mat" on page 4.

6. Close the scanner cover.

When you are finished scanning film, be sure to replace the

document mat before scanning documents or photos. See

"Replacing the Document Mat" on page 7.

Placing Medium Format Film

1. Open the cover on the medium format film holder.

2. Slide one medium format film image into the film holder

with the shiny base side facing down. Your image and any

wording on the film should appear backwards on the side

that faces up. Make sure the entire image frame is

positioned in the film holder opening.

Note:

Hold the edge of the film gently or use gloves to touch the film;

otherwise you may damage the film.

Do not cover any of the tiny holes in the film holder or the

scanner may have trouble recognizing which film holder you are

using.

6 - Epson Perfection 4490 Photo

3. Close the cover over the film and press it down until it

clicks. Then press down on all the edges of the cover to

secure it.

4. Place the film holder on the document table so that it is

aligned with the upper left corner. Make sure the tab

labelled "B" on the film holder fits into the area labelled "B"

on the scanner.

5. Make sure you removed the document mat. See "Removing

the Document Mat" on page 4.

6. Close the scanner cover.

Note:

You cannot use Full Auto Mode to scan medium format film.

When you are finished scanning film, be sure to replace the

document mat before scanning documents or photos. See

"Replacing the Document Mat" on page 7.

Placing Slides in the Holder

You can scan up to four 35 mm slides at a time using the slide

portion of the film holder.

Note:

You cannot scan negative slides.

Make sure the white stickers on the back on the film holder and the

areas around them are not scratched, dusty, or covered in any way. If

the areas are obscured, the scanner may have trouble recognizing

your slides in Full Auto Mode.

4/05