Cisco 3500 Series 설치 매뉴얼 - 페이지 23

{카테고리_이름} Cisco 3500 Series에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 3500 Series 36 페이지.

Install the Cisco SNS 3515 and Cisco SNS 3595 Hardware Appliances

Figure 8: Attach the Cable Management Arm to the Rear of the Slide Rails

CMA tab on arm farthest from server and end of

stationary outer slide rail

CMA tab on arm closest to the server and end of

inner slide rail attached to server

Reverse the Cable Management Arm (Optional)

Step 1

Rotate the entire CMA assembly 180 degrees. The plastic cable guides must remain pointing upward.

Step 2

Flip the tabs at the end of each CMA arm so that they point toward the rear of the server.

Step 3

Pivot the tab that is at the end of the width-adjustment slider. Depress and hold the metal button on the outside of the tab

and pivot the tab 180 degrees so that it points toward the rear of the

Cisco Secure Network Server 3500 Series Appliance Hardware Installation Guide

Reverse the Cable Management Arm (Optional)

CMA tab on width-adjustment slider and end of

stationary outer slide rail

Rear of server