Cisco 700 series 관리 매뉴얼 - 페이지 14

{카테고리_이름} Cisco 700 series에 대한 관리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 700 series 36 페이지. Using profiles
Cisco 700 series에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (8 페이지), 개요 (19 페이지), 시작하기 매뉴얼 (27 페이지), 사용자 설명서 (9 페이지)

페이지 인쇄

Configure User Profiles for Headset Users

If you haven't yet configured User Profiles for your users, use this procedure to set up profiles. Your headset

templates will be assigned to users via their User Profile. If you've already configured User Profiles, you can

skip this task.

Note

Configure multiple User Profiles for different groups of users as per your deployment needs. By default, all

User Profiles get assigned to the System default headset template. You can assign them to customized templates

when you configure your headset template.

Procedure

Step 1

From Cisco Unified CM Administration, choose User Management > User/Phone Add > User Profile.

Step 2

Click Add New.

Step 3

Enter a Name and Description for the user profile.

Step 4

Assign a Universal Device Template to apply to users' Desk Phones, Mobile and Desktop Devices, and

Remote Destination/Device Profiles.

Step 5

Assign a Universal Line Template to apply to the phone lines for users in this user profile.

Step 6

If you want the users in this user profile to be able to use the self-provisioning feature to provision their own

phones, do the following:

a) Check the Allow End User to Provision their own phones check box.

b) In the Limit Provisioning once End User has this many phones field, enter a maximum number of

phones the user is allowed to provision. The maximum is 20.

Step 7

Click Save.

Apply User Profiles to End Users

Associate your users to the User Profiles that you've created. The User Profile must be associated with the

end user, and the MAC of the device must be added under the controlled devices to apply the headset template

configuration changes.

Note

If you've already assigned all users to the appropriate User Profiles, you can skip this task.

Procedure

Step 1

To add a new end user to the Unified Communications Manager database manually, perform the following:

a) In Cisco Unified CM Administration, choose User Management > End User.

Cisco Headset 700 Series Administration Guide

Cisco Headset 700 Series Administration on Cisco Unified Communications Manager