Cisco 700 series 관리 매뉴얼 - 페이지 27
{카테고리_이름} Cisco 700 series에 대한 관리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 700 series 36 페이지. Using profiles
Cisco 700 series에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (8 페이지), 개요 (19 페이지), 시작하기 매뉴얼 (27 페이지), 사용자 설명서 (9 페이지)
Headset Management on Cisco Unified Communications Manager Version 12.5(1) or Older
What to do next
Modify the Default Headset Configuration File, on page 23
Modify the Default Headset Configuration File
Note the following as you work with the JavaScript Object Notation (JSON) file:
• The settings aren't applied if you are missing a bracket or brackets in the code. Use an online tool such
• Set the "updatedTime" setting to the current epoch time or the configuration is not applied.
• Confirm that firmwareName is
• Do not change a parameter name or the setting will not be applied.
Procedure
Step 1
Open the defaultheadsetconfig.json file with a text editor.
Step 2
Edit the updatedTime and the headset parameter values you wish to modify.
A sample script is shown below. This script is provided for reference only. Use it as a guide as you configure
your headset parameters. Use the JSON file that was included with your firmware load.
{
"headsetConfig": {
as JSON Formatter and check the format.
"templateConfiguration": {
"configTemplateVersion": "1",
"updatedTime": 1537299896,
"reportId": 3,
"modelSpecificSettings": [
{
"modelSeries": "530",
"models": [
"520",
"521",
"522",
"530",
"531",
"532"
],
"modelFirmware": [
{
"firmwareName": "LATEST",
"latest": true,
"firmwareParams": [
{
"name": "Speaker Volume",
"access": "Both",
"usageId": 32,
"value": 7
},
{
"name": "Microphone Gain",
"access": "Both",
"usageId": 33,
or the configurations will not be applied.
LATEST
Cisco Headset 700 Series Administration Guide
Modify the Default Headset Configuration File
23