Argos 456/2764 매뉴얼 - 페이지 2

{카테고리_이름} Argos 456/2764에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Argos 456/2764 4 페이지. Single mirror cabinet with open shelf

Assembly Instructions

Stage 1 - Fitting the Support Frame

NOTE: It would be useful to ask someone

to help you to assembly this unit.

1. Attach the divider (C) to base panel (G)

with wooden dowel (M), and then attach the

side shelf (H) to the divider with wooden

dowels (See Fig. 1).

2. Attach the R side panel (B) to the unit use

wooden dowel(N) first, and then fit it to the

base panel with assembly screw(O).

Fit the L side panel (A) to the unit with

assembly screw(O) too. (See Fig.2).

Ensure that the grooves in the side panels

face inwards and are aligned with the

groove in the base panel.

3. Insert the back panel (D) by sliding it into

the grooves of the side panels (See Fig. 3).

Ensure that the laminated white surface

is facing inwards and the holes are

positioned as shown.

4. Attach the top panel (F) to assemble the

frame, using screws & wooden dowels

(O&M) (See Fig. 4).

Fig. 1

Make sure that the back panel is located

properly in the groove in the top panel

before tightening the screws.

5. Insert the screw cover caps (S) over the

holes in the L side & R side panels (A&B).

Fig. 2

6. Fit the door catch (T) into the circular

recesses in the door (E),securing with

screws (P), and then attach the door panel

(E) to the cabinet by using door hinges &

hinge screws (J&K).(See Fig.5).

Fig. 3

Fig. 4

Fig. 5