Cisco APIC L4 설치 및 서비스 매뉴얼 - 페이지 20

{카테고리_이름} Cisco APIC L4에 대한 설치 및 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco APIC L4 46 페이지.

Summary of Server Features

Feature

Storage, front-panel

Storage, internal

Integrated Management Processor

Storage Controllers

Cisco APIC M4/L4 Server Installation and Service Guide

Description

Cisco APIC M4 and L4 (APIC-SERVER-M4 and

APIC-SERVER-L4)—The server is orderable in two different

versions, each with a different front panel/drive-backplane

configuration.

The server has these internal storage options:

• One USB port on the motherboard.

• Mini-storage module socket, optionally with either:

• SD card module. Supports up to two SD cards.

• M.2 SSD module. Supports either two SATA M.2 SSDs

or two NVMe M.2 SSDs.

• One micro-SD card socket on PCIe riser 1.

• Mixing different capacity SATA M.2 SSDs is not supported.

• It also supports USB3.0 TypeA connector.

Baseboard Management Controller (BMC) running Cisco

Integrated Management Controller (CIMC) firmware.

Depending on your CIMC settings, the CIMC can be accessed

through the 1GE dedicated management port, the 1GE/10GE

LOM ports, or a Cisco virtual interface card (VIC).

CIMC manages certain components within the server, such as the

Cisco 12G SAS HBA.

The Cisco 12G SAS RAID controller or Cisco 12G SAS HBA

plugs into a dedicated slot. Only one of these at a time can be

used at a time.

• Cisco 12G SAS RAID controller

• RAID support (RAID 0, 1, 5, 6, 10, 50, 60, SRAID0,

and JBOD mode)

• Supports up to 10 internal SAS/SATA drives

• Plugs into drive backplane

• Cisco 12G SAS HBA

• No RAID support

JBOD/Pass-through Mode support

Supports up to 10 SAS/SATA internal drives

Plugs into drive backplane

Overview