Cisco AS5200 - Universal Access Server 릴리스 정보 - 페이지 9
{카테고리_이름} Cisco AS5200 - Universal Access Server에 대한 릴리스 정보을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco AS5200 - Universal Access Server 22 페이지. Universal access server
Cisco AS5200 - Universal Access Server에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (20 페이지)
페이지 인쇄
12. TACACS+ Single Connection and TACACS+ SENDAUTH enhancements are supported.
13. Cisco IOS Release 11.2 introduces several DLSw+ enhancements available in the Plus, Plus 40, and Plus 56 feature sets.
14. SRB/RSRB is fast switched. This enhancement is on by default, but can be disabled.
15. Terminal services are supported on access servers (with limited support on router auxiliary ports).
16. Use of LAT requires terminal license (FR-L8-10.X= for an 8-user license or FR-L16-10.X= for a 16-user license).
New and Changed Information
The following sections list the new hardware and software features supported by the Cisco AS5200 for
Cisco IOS Release 11.2 P.
New Hardware and Software Features in Cisco IOS Release 11.2(26) P
There are no new hardware and software features supported by the Cisco AS5200 for
Cisco IOS Release 11.2(26) P.
New Software Features in Cisco IOS Release 11.2(11) P through 11.2(24) P
There are no new software features supported by the Cisco AS5200 for Cisco IOS Release 11.2(11) P
through Cisco IOS Release 11.2(24) P, with the exception of the following:
Bundled Modem Code for the Cisco AS5200
Bundled modem code version 3.3.20 was provided in Cisco IOS Releases 11.2(15) P and 11.2(16) P.
New Software Features in Cisco IOS Release 11.2(10) P
Modem Pooling for the Cisco AS5200
Modem pooling allows service providers to define, select, and use separate pools of modems within a
single access server or router to provide different dial-in services. Modem allocation is based on the
dialed number identification service (DNIS) and a predetermined number of modem ports based on
DNIS.
There are a number of applications for using the call setup information, including DNIS/ANI, processing
incoming call requests with CallerID, and selecting services to set up "automatically" for specified calls.
These uses generally fall into two categories: those requiring allocation of a specific number of modems
for a specific service, and those requiring allocation of specific physical modems.
For step-by-step software configuration information, refer to the online feature module Modem
Note
Pooling for the Cisco AS5200, which is part of the online publication Feature Guide for Cisco IOS
Release 11.2 P. For instructions on how to reach this publication via Cisco.com or the Documentation
CD-ROM, refer to the
78-5214-15 Rev. A0
"Related Documentation" section on page
Release Notes for Cisco AS5200 Universal Access Servers for Cisco IOS Release 11.2 P
New and Changed Information
14.
9