Cisco AS5200 - Universal Access Server 빠른 시작 매뉴얼 - 페이지 8
{카테고리_이름} Cisco AS5200 - Universal Access Server에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco AS5200 - Universal Access Server 20 페이지. Universal access server
Cisco AS5200 - Universal Access Server에 대해서도 마찬가지입니다: 릴리스 정보 (22 페이지)
페이지 인쇄
2
Install the Universal Access Server (continued)
T1/PRI card
RJ-48C-to-RJ-48C cable
6
Connect the Dual T1/PRI Card
for WAN Access
You can connect the access server to a dual T1 or
E1/PRI card for WAN access. If you have a dual
E1/PRI card, go to the next section, "Connect the
Dual E1/PRI Card for WAN Access."
You will need two straight-through
RJ-48C-to-RJ-48C cables to connect the dual
T1/PRI card to a WAN.
Note: RJ-48C-to-RJ-48C cables are not included.
T1/PRI
port 0 (RJ-45)
Straight-through
Universal access server
T1/PRI
port 1 (RJ-45)
RJ-48C jack
Step 1
Step 2
Step 3
Connect one end of the straight-through
RJ-48C-to-RJ-48C cable to the port
labeled Port 0 on the rear panel of the
access server.
Connect the other end of the cable to an
RJ-48C jack.
Repeats steps 1 and 2 to connect a second
cable to the port labeled Port 1.