Cisco AS5200-PWR-AC 교체 매뉴얼
{카테고리_이름} Cisco AS5200-PWR-AC에 대한 교체 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco AS5200-PWR-AC 17 페이지. Replacing the power supply in cisco as5200 universal access servers
페이지 인쇄
Doc. No.
78-4309-01
Replacing the Power Supply in Cisco AS5200
Universal Access Servers
Product Numbers: AS5200-PWR-AC= , AS5200-PWR-DC=
This document describes how to replace the internal power supply and includes the following
sections:
•
Safety Recommendations, page 1
•
Required Tools and Equipment, page 4
•
Removing the Chassis Cover, page 5
•
Removing the Power Supply, page 7
•
Installing the Power Supply, page 10
•
Closing the Chassis Cover, page 13
•
Cisco Connection Online, page 14
Safety Recommendations
Follow these guidelines to ensure general safety:
•
Keep the chassis area clear and dust-free during and after installation.
•
Put the removed chassis cover in a safe place.
•
Keep tools away from walk areas where you or others could fall over them.
•
Do not wear loose clothing that could get caught in the chassis. Fasten your tie or scarf and roll
up your sleeves.
•
Wear safety glasses when working under any conditions that might be hazardous to your eyes.
•
Do not perform any action that creates a potential hazard to people or makes the equipment
unsafe.
Corporate Headquarters
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134-1706
USA
Copyright © 1997
Cisco Systems, Inc.
All rights reserved.
1