Cisco AS5200-PWR-DC 교체 매뉴얼 - 페이지 13

{카테고리_이름} Cisco AS5200-PWR-DC에 대한 교체 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco AS5200-PWR-DC 17 페이지. Replacing the power supply in cisco as5200 universal access servers

페이지 인쇄

Step 6

Figure 13

Closing the Chassis Cover

Refer to Figure 14 and take these steps:

Step 1

Step 2

If you installed a different type of power supply (AC or DC) than was originally installed

in the access server, place one of the power ratings labels that came in the plastic bag with

the documentation directly over the power ratings information on the rear panel. For

example, if the original chassis came with an AC power supply and you replaced it with

a DC power supply, place the DC power ratings label over the ratings stamped on the rear

panel of the chassis. This will ensure that the correct power ratings information appears

on the rear panel.

Attaching the Power Ratings Label

INPUT 100-240V

Label

Place the chassis bottom so that the front panel is facing you.

Hold the top cover over the chassis bottom, and align the chassis and top cover tabs at the

top rear of the chassis.

Replacing the Power Supply in Cisco AS5200 Universal Access Servers

50/60HZ 1.5 - 3.0A

Closing the Chassis Cover