Epson ActionLaser 1600 첫 번째 매뉴얼 읽기 - 페이지 21

{카테고리_이름} Epson ActionLaser 1600에 대한 첫 번째 매뉴얼 읽기을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson ActionLaser 1600 26 페이지. Epson actionlaser 1600: quick start
Epson ActionLaser 1600에 대해서도 마찬가지입니다: 사용자 설명서 (10 페이지), 제품 사양 (2 페이지)

페이지 인쇄

Maintenance

Replacing the Imaging Cartridge

The imaging cartridge prints up to 6,000 pages depending

upon the complexity of your print jobs.

If your printed images become faint, you can use the printer's

control panel to determine how much toner remains in the

imaging cartridge. To do so, press the Menu button until

CONFIG MENU appears in the display. Then press the Item

button until the TONER item appears.

Count the asterisks between the E (empty) and the F (full).

Each asterisk represents about 20% of the total toner capacity.

When you see only one asterisk on the SelecType TONER

message (indicating that there is less than 20% toner left), you

should replace the imaging cartridge.

The cartridge you should use is the S051016, which is specially

designed for your highquality 600 dpi printer. Do not use the

S051011 cartridge.

Do not touch the fuser, which is marked with a CAUTION

HOT SURFACE label.

1. Make sure the printer is turned on.

Note:

If you replace the cartridge when the power is off, you must

change the TONER LIFE setting using SelecType CONFIG

MENU after you turn on the printer. See Chapter 4 of the

Reference Guide for more information.

Maintenance 17