Cisco C220 M3 설정 - 페이지 3

{카테고리_이름} Cisco C220 M3에 대한 설정을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco C220 M3 10 페이지. Rack server

Server Setup

Note

For releases 1.0-1.2 a reboot may be needed if an interface was not plugged in at boot time. This is a pre-1.3

issue, except for any interface requiring an SFP, which will still needs to be plugged in at boot time post 1.3.

The network cable plugged into the SFP may be safely hot-plugged.

C220 M4 Rack Server Setup

The interfaces must be properly connected and configured for the appliance to operate.

Use port 3 Slot 2 for the (optional) Clust interface.

Note

The details for your appliance may differ from the illustrations. Contact [email protected] if you

have any questions.

Figure 3: Cisco UCS C220 M4 SFF Rack Server

C220 M4 Rack Server Setup

Server Setup