Epson ActionScanner II PC - ActionScanning System II 시작하기 - 페이지 17
{카테고리_이름} Epson ActionScanner II PC - ActionScanning System II에 대한 시작하기을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson ActionScanner II PC - ActionScanning System II 27 페이지. Technical brief (scanners)
Epson ActionScanner II PC - ActionScanning System II에 대해서도 마찬가지입니다: 사양 (6 페이지), 매뉴얼 (11 페이지)
페이지 인쇄
3.
If you are running Windows 3.1 Program Manager, open the
File menu and choose Run. You see the Run dialog box.
Type A: SETUP (or B:SETUP, or D:SETUP, etc.) in the
Command Line box and choose OK.
If you are running Windows 95, click Start and then select
Run. Select A: SETUP (or B : SETUP, or D: SETUP, etc.) from the
Open pull-down menu, if necessary, and choose OK.
You see the initial Setup screen. Choose Continue to accept
4.
the default directory in which the program will install its
files. Or type in another directory and choose Continue.
5.
On the next screen, enter your name and a company name;
then choose Continue.
6.
Verify the name and company at the next screen and choose
OK.
7.
The program begins copying files. Follow the instructions on
the screen and change diskettes as prompted (if installing
from diskette).
8.
The setup program creates an Image-In Easy Pack program
group. When the installation is done, select any plug-ins
you may have for the program and choose Continue.
9.
You see a ReadMe file containing instructions for installing
the FotoTune LE program that comes with Image-In on
separate diskettes. Follow these instructions later to install
FotoTune. For now, choose OK.
10. At the next screen, choose OK again and remove the last
diskette from the drive (or the CD from the CD-ROM drive).
11. If you are running Windows 3.1, double-click the Image-h
for Epson icon in the Image-In Easy Pack program group.
14