Epson ActionScanner II PC - ActionScanning System II 시작하기 - 페이지 9
{카테고리_이름} Epson ActionScanner II PC - ActionScanning System II에 대한 시작하기을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson ActionScanner II PC - ActionScanning System II 27 페이지. Technical brief (scanners)
Epson ActionScanner II PC - ActionScanning System II에 대해서도 마찬가지입니다: 사양 (6 페이지), 매뉴얼 (11 페이지)
페이지 인쇄
Follow these steps to install the card in your computer:
1. Turn off the computer and any peripheral devices.
2. Disconnect the computer's power cable from the electrical
outlet and from the back panel. Also disconnect any other
cables, including the keyboard cable.
3. Remove the cover from your computer. If you need detailed
instructions, see your computer manual.
4. Before you touch any of the computer's internal components,
touch an unpainted metal surface inside the computer case
to discharge any static electricity.
5. Choose an option slot for the interface card. You can install
the card in any available slot.
6. Remove the retaining screw from the option slot cover and
remove the slot cover. Keep the screw to secure the
interface card to the computer. Store the slot cover in a safe
place in case you remove the interface card later.
7. Insert the interface card into the slot, guiding it straight
down. Push the card down firmly (but carefully); you
should feel it fit into place.
8. Secure the card to the computer with the retaining screw.
9. Replace the computer's cover, reconnect all the cables, and
plug the power cord into an electrical outlet.
6