Cisco C460 M4 빠른 시작 매뉴얼

{카테고리_이름} Cisco C460 M4에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco C460 M4 3 페이지.

Contents

Introduction

Problem

Potentially Impacted Systems:

Customer Visibility / Impact:

Solution

Work Around Options:

Work Around 1 - Reset the IMC to Factory Default Settings

Work Around 2 - Resetting to Factory Defaults via IMC CLI

Introduction

The intent of this document is to address the issue seen regarding Trusted Platform Module (TPM)

related System Event Logs (SEL) events on some C460 M4 servers. A small number of C460 M4

SPARE servers will see a critical SEL event related to TPM presence right out of the factory. The

instructions below will assist you in resolving servers impacted by this issue.

Problem

Potentially Impacted Systems:

About 614 SPARE C460 M4 Systems (Shipped between June 2

2014, and April 13

2016.)

Customer Visibility / Impact:

Customers may see a critical SEL event similar to the one below on servers received from the

factory.

There is NO operational impact to the server, but the message may lead to unessary concern

resulting in a call to TAC. This has to do with the way TPMs were handeled in manufacturing.

C460 M4 systems keep a "Cached" value for TPM presence, indicating if a TPM was was ever

installed in the server - every server has a TPM installed durring testing. The C460 M4 also tracks

the current precense of the TPM, and since all servers ordered as spares ship without a TPM, the

system triggers an alarm thinking that the module that was once installed has been removed.

Solution

The work-arround below will allow you to quickly address this SEL event should you wish to

remove the messages. The work-arround involves resetting the Integrated Management Controller