Cisco C800 Series 서비스 보충 설명서 - 페이지 10

{카테고리_이름} Cisco C800 Series에 대한 서비스 보충 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco C800 Series 27 페이지. M4 storage subsystem

3.3. CE Conformity

The device complies with the requirements of EC directives 2004/108/EEC regarding

"Electromagnetic Compatibility" and 2006/95/EEC "Low-Voltage Directive". This is indicated

by the CE certificate label (CE = Communauté Européenne) on the back of the device.

All other equipment which is connected to this product must also have radio noise suppression in

accordance with EC directive 89/336/EEC.

Products which meet this requirement are accompanied by a certificate to that effect issued by the

manufacturer and/or bear the CE mark. Products which do not meet this requirement may be operated

only with the special permission of the German Federal Approvals Office for Telecommunications (BZT).

This is "Class A" equipment. This equipment may cause harmful inter- ference in residential areas.

In this case, the user may be required to take appropriate measures and bear the costs resulting

from these measures.

● For safety reasons, at least two people are required to install the storage subsystem because of its

weight and size.

● When connecting and disconnecting the cables, observe the notes in the operating manual for

your system and the chapter "Important notes" in the technical manual for the relevant rack.

● Ensure that the anti-tilt bracket is correctly mounted when you set up the rack.

● For safety reasons, no more than one unit may be pulled out of the rack at any one time during

installation and maintenance work.

● If more than one unit is pulled out at any one time, the rack may tip over.

● The rack must be connected to the mains by an authorized specialist (electrician).

Operating Manual

3.3CE Conformity