Argos 608/0938 조립 지침 매뉴얼 - 페이지 15
{카테고리_이름} Argos 608/0938에 대한 조립 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Argos 608/0938 20 페이지. Athina 1000mm fitted kitchen base unit
페이지 인쇄
Assembly Instructions
Step 20
Drill the handle holes
in the door
Important: Please follow
these instructions
carefully.
Lay the doors
down
9
onto a smooth surface.
Important: Check that
the holes and hinges are
in the same place as the
diagrams.
Note: We recommend
the use of a small piece
of waste wood, placed
behind the hole while
drilling, to reduce the
possibility of any
breakout.
Using the pilot hole in
the rear face of the
door
, drill through the
9
holes indicated opposite,
using a 2.5mm diameter
drill.
Turn the door
over
9
and open out the 2.5mm
holes that you have just
drilled by drilling back
through them with a
5mm drill.
Carefully choose which 2 holes you
need to drill in each of the doors
This will be
the left door
Small piece of
waste wood
DO NOT drill
these holes
This will be
the right door
IMPORTANT
ONLY drill
these 2 holes
9
ONLY drill
these 2 holes
9
DO NOT drill
these holes
Small piece of
waste wood
14