Cisco Firepower 1120 하드웨어 설치 매뉴얼 - 페이지 21

{카테고리_이름} Cisco Firepower 1120에 대한 하드웨어 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco Firepower 1120 30 페이지. Connected grid router
Cisco Firepower 1120에 대해서도 마찬가지입니다: 설치 매뉴얼 (6 페이지), 빠른 시작 매뉴얼 (10 페이지), 매뉴얼 (6 페이지), 하드웨어 설치 매뉴얼 (42 페이지), 배포 매뉴얼 (8 페이지), 시작하기 (42 페이지), 하드웨어 설치 매뉴얼 (42 페이지)

Mount the Chassis

•

Note

The chassis is thoroughly inspected before shipment. If any damage occurred during transportation or any

items are missing, contact your customer service representative immediately. Keep the shipping container in

case you need to send the chassis back due to damage.

See

Package Contents, on page 4

Step 1

Remove the chassis from its cardboard container and save all packaging material.

Step 2

Compare the shipment to the equipment list provided by your customer service representative. Verify that you have all

items.

Step 3

Check for damage and report any discrepancies or damage to your customer service representative. Have the following

information ready:

• Invoice number of shipper (see the packing slip)

• Model and serial number of the damaged unit

• Description of damage

• Effect of damage on the installation

The chassis ships with rack-mount brackets, which you can install on the front or the rear of the chassis.

Unpack and Inspect the Chassis, on page 17

Rack-Mount the Chassis, on page 17

C H A P T E R

for a list of what shipped with the chassis.

Cisco Firepower 1100 Series Hardware Installation Guide