Cisco Firepower 1120 매뉴얼 - 페이지 5

{카테고리_이름} Cisco Firepower 1120에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco Firepower 1120 6 페이지. Connected grid router
Cisco Firepower 1120에 대해서도 마찬가지입니다: 하드웨어 설치 매뉴얼 (30 페이지), 설치 매뉴얼 (6 페이지), 빠른 시작 매뉴얼 (10 페이지), 하드웨어 설치 매뉴얼 (42 페이지), 배포 매뉴얼 (8 페이지), 시작하기 (42 페이지), 하드웨어 설치 매뉴얼 (42 페이지)

Cisco Firepower 1120 매뉴얼
Table 1
Connected Grid Modules for CGR 1000 Series Routers Documentation (continued)
Title
Choosing Your Cisco Connected Grid Antenna
Antenna Specifications
This section contains specifications for the fixed antennas that ship with the router.
For all technical details and specification for these and other Cisco Connected Grid antennas, see the
Cisco Connected Grid antenna documentation on Cisco.com at:

GPS Antenna Specifications

Specification
Dimensions
Connector (cable to router)
Frequency
Nominal Impedance
VSWR
Peak Gain
Minimum Gain
Pattern Type
Polarization
LNA Gain
Out of Band Attenuation
Max. Input Power
Operating Temperature
IP Code Rating
Wind Speed Rating
Compliance
Description
A decision tree to help you choose the correct antennas for your
platform and physical environment.
Value
Cable length: 15 feet (460.8 cm)
Diameter of antenna rodome: 1.97 inches (50 cm)
TNC male
1575.42 MHz +/-5MHz
50 Ohms nominal
2.0 Max. in band
4.0 dBi min. @ zenith
1 dBi @ 10 degrees elevation
Hemispherical
Circular RHCP
26 dB +/-2 dB
DC Voltage: 3–5VDC
20 dB min. at 1575+ / -50MHz
20 mA max @ 3.3VDC +/-.3VDC
-40° C to +85° C
IP67 (Outdoor use)
165 MPH
RoHS
75
www.cisco.com/go/cg-modules