Epson CX4200 - Stylus Color Inkjet 사용자 설명서 - 페이지 8
{카테고리_이름} Epson CX4200 - Stylus Color Inkjet에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson CX4200 - Stylus Color Inkjet 18 페이지. Continuous ink supply system for xm prefilled version with auto reset chips
Epson CX4200 - Stylus Color Inkjet에 대해서도 마찬가지입니다: 빠른 매뉴얼 (48 페이지), 여기에서 시작하기 매뉴얼 (8 페이지), 기술 요약 (6 페이지), 업데이트 (1 페이지), 설치 지침 (7 페이지)
페이지 인쇄
Epson Stylus CX4200 Series/Epson Stylus CX4800 Series
4. Press the
button until you see the
Copy
desired number of copies in the
window. You can select up to 9 copies at
a time this way.
To make 10 or more copies, see the
section to the right.
5. Press the paper type button to select
. The light indicates which
Plain Paper
type is selected.
6. Press the paper size button to select
.
Letter
7. If you want your copies automatically
reduced or enlarged to fit the loaded
paper size, press the
Fit to Page
8. To make a color copy, press the x
button.
Color
To make a black and white copy, press the x
button.
The P
light flashes and after a moment the Epson Stylus
On
CX starts printing.
If you need to stop copying at any time, just press the y
button. Do not pull out paper that is being printed; it will be
ejected automatically to the output tray.
Note:
The copies may not be exactly the same size as the original.
Copying a Photo
1. Make sure the Epson Stylus CX is turned on.
2. Place the photo on the glass as described on page 7. Be sure
to close the document cover.
3. Load up to 20 sheets of letter-size, 4 × 6-inch, or 5 × 7-inch
photo paper. (See page 4 if you need instructions.)
4. Press the
button until you see the
Copy
correct number of copies in the
window. You can select up to 9 copies at
a time this way.
To make 10 or more copies, see the next
section.
5. Press the paper type button to select
.
Photo Paper
6. Press the paper size button to select
,
, or
Letter
4"x 6"
5"x 7"
7. If you want borderless photos (printed
without a white border), press the
button. Otherwise, photos are
Page
printed with a .12-inch (3.0 mm)
border.
8
Copy
button.
Start
Start B&W
Copy
.
Fit to
8. To make a color copy, press the x
To make a black and white copy, press the x
button.
The P
light flashes and after a moment the Epson Stylus
On
CX starts printing.
If you need to stop copying at any time, just press the
button. Do not pull out paper that is being printed; it will be
ejected automatically to the output tray.
Note:
The copies may not be exactly the same size as the original.
Making 10 or More Copies
1. Make sure the Epson Stylus CX is turned on.
2. Place the photo on the glass as described on page 7. Be sure
to close the document cover.
3. Press the
Copy
window. This tells the Epson Stylus CX to print up to
100 copies.
4. Load enough paper for the number of copies (up to 100)
you want to make. For example, to print 12 copies, load
Stop
12 sheets of paper.
5. Press the paper type button to select
.
Paper
6. Press the paper size button to select
.
5"x 7"
7. Press the x
The Epson Stylus CX makes copies until it runs out of
paper. Then the red
8. To make more copies, load more paper and press the
x
Start Color
If you don't need any more copies, press the y
button.
Note:
When making a lot of copies, it is a good idea to remove the printed
copies from the output tray after every 10 sheets or so.
Speeding Up Printing
If you want to make a copy quickly, you can print a "draft"
copy. The print quality is reduced, but the copy prints faster.
1. Load plain, letter-size paper and select
size on the control panel.
Letter
2. Press and hold down the y
Start Color
x
button (to copy in black and white). When the P
B&W
light starts flashing, release both buttons.
You can return to regular printing after your draft print job
finishes.
5/05
Start Color
button until you see "
" in the
–
Plain Paper
Letter
or x
Start Color
Start B&W
light comes on.
b Error
or x
button to resume.
Start B&W
Plain Paper
button, then press the
Stop
button (to copy in color) or the x
button.
Start B&W
Stop
y
Copy
or
Photo
,
, or
4"x 6"
button.
Stop
and
Start
On